500 Series LMI Setup

Transcript for this video. Not a substitute for the operator's manual.

[Music]

This video is to illustrate how to properly configure the load moment indicator, or LMI, for a SPYDERCRANE® 500 Series crane.

To set up the LMI, begin by pressing the button to the right of the crane icon in the upper right corner of the LMI. This populates a series of submenus on the left side of the LMI. The first submenu relates to the outrigger configuration, followed by the basket selection. It is very important that you make a selection for each of these categories before attempting to operate the crane.

To begin, press the button to the left of the outrigger icon to move into the outrigger configuration menu. Select your outrigger configuration by pressing the button next to the "outriggers max," "outriggers mid," or "outriggers min" option. Choose the configuration that is suitable for your lift by pressing the corresponding button. Your selection will turn a dark shade of blue. To confirm your selection, press the Enter key, identified by three arrows in a circle on the keypad.

Next, the LMI requires you to select the proper configuration if you are utilizing a work platform with your crane. Select the top icon if you are utilizing a work platform, or the second option to utilize the crane without a work platform. Press Enter to confirm.

Once you have confirmed this last option, the picture in the middle of your screen should resemble the current configuration of your crane. If no changes are necessary, press the Enter button to confirm. This will return you to the main LMI setup screen.

Before we can operate the crane, there is one more important option we must configure, which is the parts of line you are using for your lift. Underneath the crane icon, you will notice an icon with a hook and a number on it. Press the button next to this icon to change the number. Once you select the number that corresponds to the parts of line your crane is configured for, press the Enter key to confirm. After a series of quick tests, you will reach the working screen. You are now ready to do a lift.

While lifting with your SPYDERCRANE, the working screen will depict important information about your load and crane. From the top down, you will see the tip height, boom length, boom angle, working radius, actual weight of the load on the hook, and your maximum capacity of the crane based on the configuration of the crane entered into the LMI during setup.

Although these videos are to aid you in the familiarization of the SPYDERCRANE, please reference and follow all manufacturer's operating and safety recommendations.